| CSB-200 Technical Specifications |
Microwave frequency
|
9.9 or 10.525 GHz (in accordance with national frequencies) |
| Modulation frequency |
2.5 KHz +/- 500 Hz |
| Maximum transmitting power |
10 mW (Continues) 25 mW (Peak) |
| Scope (Length of protection zone) |
Max 660ft (200m) |
| Lobe width |
Approx 17ft (5m) |
| Lobe height |
Approx 6ft (1.8m) |
| Power supply voltage |
12....30 V |
| Current Consumption |
Transmitter - 20 mA at 12 Vdc / Receiver - 20 mA at 12 Vdc |
| Relay contacts values |
N.C 28 Vdc, Maximum current 0.1A |
| Alarm Period |
3 Sec (Max) |
| Tamper switch |
N.C 28 Vdc, Maximum current 0.1A - open when cover is closed |
| Detection speed (Target velocity) |
1...33ft/sec (0.3...10m/sec) |
| Remote testing |
Built-in self-test generator simulates actual intrusion signals |
| Flatness of ground |
Approx 1ft (0.3 m) |
| Maximum height of grass on the ground |
1 ft (0.3 m ) |
| Maximum height of snow on the ground |
1.6 ft (0.5 m) |
| Dimensions of unit (Trans/Rec) w/o bracket |
10.1" x 8.2" x 3.3" (260mm x 210mm x 85mm) |
| Weight (T, R and accessories) |
5.72 lb (2.6 kg) |
| Operating temperature range |
-40°F - +140°F (-40°C - +60°C) |
| LED indicator |
Internal warning LED for visual indication during installation |
| Weatherproofing |
All openings and gasket and sealed - Conformal coated circuit board |
OUTDOORDETECTION 
